Forest Hill Iron On Badge
£9.99
- Description
- Garment Care
-
Preheat the iron to a hot cotton setting.
-
Place the Badge in the desired location and cover with a thin piece of cloth.
-
Gently press the preheated iron onto the Badge and fabric.
-
Apply firm pressure and hold the iron in place for about 10-15 seconds.
-
Move the iron in a circular motion or back and forth to ensure even heat distribution.
-
Iron the opposite side for approx 20-30sec to reinforce.
-
When washing turn your garment inside out and use a gentle wash cycle.
The Following washing instructions will keep the garment in optimum condition and ensures extended life with Satisfactory wear:
- Before washing turn the garment inside-out.
- Do not Bleach.
- Don’t use fabric conditioner.
- Do not Tumble Dry the Garment.
- Wash the Garment at or Below 40.
- Iron the Garment on a low Temperature.
- Do not use Non-biological washing powder or detergent.
- Dry clean it with any solvent except Trichloroethylene.
- Shake the garment out well and place on a hanger or rack.
- Remove the garment from the washing machine as soon as the wash is finished.
